Companion

Anchor Points: This graphic requires at least three anchor points to define the boundary of the area. Add as many points as necessary to accurately reflect the area's size and shape. Size/Shape: Scalable. Orientation: Not applicable.

Anchor Points: This graphic requires at least three anchor points to define the boundary of the area. Add as many points as necessary to accurately reflect the area's size and shape. Size/Shape: Determined by the anchor points. Orientation: Not applicable.

Usually an entry in the MilStd that is just a category containing other symbols and not something that gets drawn itself.

Anchor Points: This graphic requires at least two anchor points, points 1 and 2, to define the line. Additional points can be defined to extend the line. Size/Shape: Scalable/Curve. The curvature of the line is operator defined. Orientation: The first and last anchor points determine the length of the line.

Anchor Points: This graphic requires at least two anchor points, points 1 and 2, to define the line. Additional points can be defined to extend the line.

Anchor Points: This graphic requires at least two anchor points, points 1 and 2, to define the line. Additional points can be defined to extend the line.

Anchor Points: This graphic requires at least two anchor points, points 1 and 2, to define the line. Additional points can be defined to extend the line.

Anchor Points: This graphic requires at least three anchor points to define the boundary of the area. Add as many points as necessary to accurately reflect the area's size and shape.

Anchor Points: This graphic requires at least two anchor points, points 1 and 2, to define the line. Additional points can be defined to extend the line. Size/Shape: Scalable/Curve. The points are typically connected with a solid straight line with alternating slanted lines connected as depicted in the example to indicate convergence. Orientation: The first and last anchor points determine the length of the line. The alternating slanted lines will be evenly spaced along the line. Orientation is determined by the anchor points.

Anchor Points: This graphic requires at least two anchor points, points 1 and 2, to define the line. Additional points can be defined to extend the line.

Anchor Points: This graphic requires at least two anchor points, points 1 and 2, to define the line. Additional points can be defined to extend the line. Size/Shape: Scalable. Orientation: The graphic is oriented upright on the display as shown in the example and operator-centered over the desired location.

Anchor Points: This graphic requires one anchor point. The center point defines the center of the graphic. Size/Shape: Scalable. Orientation: The graphic is typically centered over the desired location.

Anchor Points: This graphic requires one anchor point. The center point defines the geometric center of the graphic. Size/Shape: Scalable. Orientation: The graphic is centered over the anchor location.

Anchor Points: This graphic requires one anchor point. The center point defines the center of the graphic. Size/Shape: Scalable. Orientation: The graphic is oriented upright on the display and operator-centered over the desired location.

Anchor Points: This graphic requires one anchor point. The center point defines the center of the graphic. Size/Shape: Scalable. Orientation: The graphic is centered over the location of the reported wind.

Anchor Points: This graphic requires a minimum of two anchor points. The first point defines the location of the plot circle. Additional points define the wind shaft and the speed of the wind. Wind speed is depicted on the shaft using a combination of the shaft alone (1-2 knots), half barbs (5 knots), barbs (10 knots) and pennants (50 knots). Wind speeds 5 knots or greater are rounded to the nearest 5 knots. Missing wind speed is depicted by an "X" at the end of the wind shaft. Winds with missing direction are not displayed.

Anchor Points: This graphic requires one anchor point. The center point defines the center of the graphic. Size/Shape: Scalable. Orientation: The graphic is centered over the location of the reported cloud cover.

Anchor Points: This graphic requires one anchor point. The center point defines the center of the graphic. Size/Shape: Scalable. Orientation: The graphic is centered over the location of the reported conditions.

Anchor Points: This graphic requires one anchor point. The center point defines the center of the graphic. Size/Shape: Scalable. Orientation: The graphic is centered over the position of the tropical system.